DIY Timing Cover Removal A Step-by-Step Guide for Beginners

Yes, if it is the TA cover. I recall an OEM cover only allow seals to be inserted from inside of the cover. How to remove the Timing Cover along with Harmonic Balancer, Water Pump, Alternator, and Belt Tensioner. Always use 6 point sockets when ... Loosen up some of the otherbolts on the oil pan, to allow some room for the timing cover to move around. If not there may be pressure from the ... Remove radiator to gain better access. Remove starter dog and crankshaft pulley. Remove bolts holding timing chain cover in place. NB the bolts are different ... The proper procedure to remove the timing cover is to remove the oil pan and the oil sub pan. This is to be done before removal of the timing chain cover. To replace the timing cover on the 3rd Generation is an a time consuming job, but can be done home with the proper tools. First thing to do is unhook the ... To take off the timing cover you need to lift the engine off of the mounts, drive front DS and sway bar, lower oil pan, upper oil pan and oil ... General Tech Help - Remove Timing Belt Cover - Hi all, from reading other threads I think my front counter shaft seal is going bad so I want ... Im trying to get the timing cover out I have the alternator out and the belt and the tensioner pulley. there were 4 long screws that when i took out a lot of ... Try this removal: Disconnect battery ground cable, then remove accessory drive belts. Remove engine cooling fan, hub and shroud. Remove crankshaft damper hub ...