Starter Power Dynamics Understanding the Engine's Starting Force

The Factory service manual says that the starter uses 0.95kw at 12V. that works out to only 79.16 Amps. Everything powers up, the dash lights come on, windows roll down, keyless entry works. But for some reason there's no power to the starter. First, a starter is an electric motor that converts electric power from the battery into mechanical power that will crank the engine. Second, the starter must ... Check the leads going to the starter motor. If they are really dirty / damaged, they can not move enough juice to spin the starter. As background when pinion starts to slide out, the contact in solenoid closes and sends power to starter motor. If pinion does not slide all ... It died, and when I hit the starter button, all the power shut off instantly. I figured it was a fuse, and I'd deal with it later in the day. Purple will only have 12v when the key is held in crank posistion is the negative battery cable attached to passenger head. The common starting problems in preludes are related to the main relay and the immoblizer, either of which will still allow the motor to crank ... If I jump power to solenoid the starter turns the engine fine. Follow the solenoid lead back to the fuse block under hood and it is on a plug with one other ... There are several different reasons the BCM will not send a signal to the starter relay. One could be a simple popped fuse.