Automotive Ignition Revolution Unlocking the Power of Starter Motors

You will need to locate the start wire on the engine harness, normally located near the starter or on the starter it self. here is what you have to connect to ... They make dummy relays, but they can end up in heartache. You could find one and it by passes the relay entirely but just plugs in where the ... The problem was that the car wouldn't start. I'd turn the key and you could hear the electric hum like the starter was trying but it couldn't turn. If I jump power to solenoid the starter turns the engine fine. Follow the solenoid lead back to the fuse block under hood and it is on a plug with one other ... The common starting problems in preludes are related to the main relay and the immoblizer, either of which will still allow the motor to crank ... Trip the relay with this wire and power the relay from the battery lug on the starter. What causes it is all the bad connections (fuse block, ... A solenoid would be ON the starter (the smaller cylinder). There is no difference between the 2 large terminals. The starter solenoid is sometimes called the starter relay, but many cars reserve that name for a separate relay which supplies power to the starter solenoid. When the key is turned to Start, power comes to the relay coil from the ignition switch, and pin 16 would normally be at or near ground voltage. It would back feed 12 volts to the starter when the ignition turns on power to the coil so power would be going to S any time the key was in the ...