Ignition Authority A Comprehensive Guide to Starter Motors

Purple will only have 12v when the key is held in crank posistion is the negative battery cable attached to passenger head. there will be a small ground wire to that solenoid and a small key on hot wire that activates the solenoid to make the connection and send power ... The purple wire going to the solenoid should get power when you turn the key to the start position. Did you check for that? The signal wire will only see power in the start position. Check the fuses and might want to swap the starter relay out with another one to make ... Remote key FOB may need new batteries. When you press the Keyless Ignition button (KIN Button), a request is sent to the RF-Hub via the private ... It's possible that the relay is the problem but normally, a bad starter relay just keeps the bike from starting and doesn't affect the rest of the electrical ... If I jump power to solenoid the starter turns the engine fine. Follow the solenoid lead back to the fuse block under hood and it is on a plug with one other ... Everything powers up, the dash lights come on, windows roll down, keyless entry works. But for some reason there's no power to the starter. It's time to back-trace from the key switch on the column to the battery and see where there is a problem. John76 ... Make sure the Black/white wire is connected to the #50 tab on the starter... not the #15 tab. You can connect the Red/black wire to the ...