Drive with Precision Replace Tie Rod Boots for Improved Handling

The boot needs to be on there to keep the road dirt and debris out of the joint. I would probably try using a plastic dash tool to pop it over ... Mark the lock nut location with paint or a file. Back the nut off and separate the inner and outer rods, remove the lock nut. Replace the boot. Shop for New Auto Parts at 1AAuto.com https://trq.video/c-306-h Rubber or plastic boots cover a variety of joints to protect them from dirt, ... Safety warning. You cannot replace just the boot alone. It is specially fitted from the factory i have heard. I put it on partially, not snug ... If you need to replace just the boot, because it cracked due to age, and the tie rod joint itself, is still good, I'd look into an Energy ... Anyone replace just the boots on the tie rods? They look like ... Also, I would like to replace the boots on the outer tie rod ends, as ... It's easy, you just need a press to pop the outer tie rod out of the knuckle. Replacing it completely should only take 15 minutes or so. You can ... The boot is as simple to replace as pulling off the metal bands and removing and replacing the rubber boot - then replacing the metal bands. This video will show you how I replaced the damaged inner tie rod end accordion dust boots on a 2002 Toyota Avalon. Just replace both inner and outer including the boots while you're down there. The inners will give you a little more problem to take out than the outers.