Elevating Tailoring The Essential Role of Pant Wires

The blue wire would go to the antenna timer, which seems to mean splicing the green/black from the existing radio to the dark blue wire. FLY CABLE LENGTH / CONNECTOR. • 30” coaxial cable RG 316 white/RP-SMA (3x). OPERATING / STORAGE TEMP. • -40° to +70° C. INSTALLATION HARDWARE. • Wall mountable ... The red/black wire is the power supply; the source is via fuse 19, which supplies power to the clock, the headunit, and the power antenna. I have Pioneer DEH6300UB head unit, the harness for the pioneer has a "System Remote Control" blue/white wire which in the manual says ... The power antenna wire on your aftermarket harness gets hooked to the blue or blue/white wire on your deck. Start by confirming you have voltage at the designated wire coming out of the harness when turning on your radio. If so, then do the same at the electrical ... It is a remote turn on wire or a 12 volt output to power up an amplifier or lighting or anything that requires 12 volts when the radio is on! 1) I have 3 antenna wires labled -45, 90 or V, and +45. On the AP-134, the ports are labled ANT0, ANT1, and ANT2. I couldn't find ... Can you just connect the blue wire from the factory side to the red wire for a more stable connection? As well goes for those antenna ... You need to connect the blue wire from your new stereo to the corresponding power antenna wire in your car. That should be pin 14, green wire on your car's ...