Discover the Key Component Unraveling the Pant Wire

The antenna wire from the head unit needs to connect to the antenna turn on wire on the 10 pin connector. Soon as I connected this, every channel came in as HD. You need to connect the blue wire from your new stereo to the corresponding power antenna wire in your car. That should be pin 14, green wire on your car's ... The stereo, a Pioneer, has the blue wire to connect to either the amp remote ON lead or too the power antenna lead. In this case that blue wire will be ... I think there is a Y-adapter similar to an RCA Y-adapter that should do what you're looking for. I'd try Radio Shack, then online if they don't ... Connecting the power antenna wire to the radio power wire had predictable results - the antenna goes up every time the ignition is turned on independent of the ... Yes, these two wires should be connected together. This is what allows the radio to retract the antenna when it isn't being used. Start by confirming you have voltage at the designated wire coming out of the harness when turning on your radio. If so, then do the same at the electrical ... That wiring adapter kit also included an "antenna adapter", which itself also has a blue wire. What gets connected to what? All three together? The blue/blue white wire is normally the wire that tells a retractable antenna to extend when the head unit is switched on. It's not the same as ... If you manage to pull out the radio you can tap into that because the antenna remote (that feeds the antenna amplifier) is switched with the radio.