Revolutionizing Control The Essential Guide to Pilot Wires

it connects to your car's existing harness and you don't have to cut into your existing wiring and take a chance on screwing something up ... You need to connect the blue wire from your new stereo to the corresponding power antenna wire in your car. That should be pin 14, green wire on your car's ... Start by confirming you have voltage at the designated wire coming out of the harness when turning on your radio. If so, then do the same at the electrical ... Per the BGB, the radio and player has a wire (color B-R) marked ANT+ that is routed to the auto antenna control relay. Another wire from the ... 1) I have 3 antenna wires labled -45, 90 or V, and +45. On the AP-134, the ports are labled ANT0, ANT1, and ANT2. I couldn't find ... There are working adapters you can buy that (after a few minutes of programming) will make your current steering wheel controls work with the new head unit. IIRC, either Sony or JVC (can't remember which) 2 separate blue wires. One wire is for the power antenna, and the other is the amp turn-on lead. For example, I want to use MA-ANT-27 and MA-ANT-25 for that AP, should I attach one antenna cable to 2.4 GHz and one cable to 5 GHz port? Or I connect ant ... Easy and free solution #1. Connect both blue (to power antenna) and blue/white (to remote amp terminal) wires to the blue/white (remote wire ... The blue wire from the antenna adaptor goes to the blue Pioneer wire that controls the power antenna (which the Cube doesn't have).