The Master Key How Pilot Wires Unlock Accurate Control

Also look along the length of the cable and see if it has a type printed on it (like RG-xx). Then go to a local ham radio store and ask if they ... The antenna wire from the head unit needs to connect to the antenna turn on wire on the 10 pin connector. Soon as I connected this, every channel came in as HD. Just install an on-off switch between the blue wire from the radio and the blue wire to the antenna. When the switch is on the antenna will go ... I ran mine from the amp trigger wire. The newer head units don't seem to come with the separate antenna wire anymore, which is too bad since it ... I originally hooked the blue antenna wire coming out of the kenwood to the blue "power antenna" wire on the wiring harness. Bad reception. I ... I pulled everything out and connected the blue antenna wires (radio to wiring harness pin #14) and re-installed everything. The verdict: no improvement in ... The power antenna wire on your aftermarket harness gets hooked to the blue or blue/white wire on your deck. #1: There is a BLACK with a RED stripe. #2: there is two PINK with a LIGHT BLUE stripe that were joint together (one was a jumper between 2 ... the ANTENNA BOOSTER AMP WIRE which MUST be connected in order to get decent FM/AM signal, is kind of a separate single wire bundled with foam ... it connects to your car's existing harness and you don't have to cut into your existing wiring and take a chance on screwing something up ...