Unlock Safety Understanding the Color Code of Backup Lights

The wire you need to splice into in order for the camera to turn on when you put the car in reverse is the on the DRIVER'S SIDE, and it is the BROWN WIRE. Left tail light has a white/purple wire is positive and black wire is negative. Just put a VLED license plate light on this past weekend and it worked great. Yellow is industry standard right turn, green is left turn. The problem is that there are no other wires under the bed, so I'll have to find it under the cab. It is the blue/white wire as jrod5150 has pointed out. It powers the reverse light bulbs. However, if you are installing a stereo unit then using the correct ... Green is hot reverse, and I think ground was black, but I'm not positive on that. Ground is not yellow, blue, green, or brown. so the reverse light wire that runs from the tail lights through the harness to the front of the truck is purple with a black stripe. The ... The wire should be orange, at least it is on my 23 JLUR.. but depending on the size of lights you plan to run in the rear proper way to do this is to wire in a ... Hi All,I recently bought an aftermarket backup camera for my Journey and I'm looking for the reverse light wire color to hook in with the ... White with green should be reverse. Larger diameter green should be the trailer brake wire from the output of the trailer brake controller. Reverse light - Light Green wire at the Black 6-pin connector. Image. I also suggest that you wire the camera permanently powered, so you can ...