Expanding Your Knowledge The Comprehensive Guide to Backup Light Colors

There are 2 wires that are white with green tracers, the one with the light green tracer is the correct wire. The pair of e3 reverse lamp wires are German color coded as gr/ge (which would be Gray/Yellow) and br (with would be brown). Note: Brown wires ... Black/blue wire powers the back-up lights according to WD 29/9 or 29/11; left/right. P ... The reverse light wire is green with a black stripe. Black is the color of the ground around rear light area. Black with red stripe is reverse lights. Brown is common ground from all bulb sockets to a splice, then black to the ground grommet. If you had ... White with green should be reverse. Larger diameter green should be the trailer brake wire from the output of the trailer brake controller. Hi All,I recently bought an aftermarket backup camera for my Journey and I'm looking for the reverse light wire color to hook in with the ... Reverse lights do have to be white...marker lights and turn signals can not be blue, red, or bright white...as these are emergency colors. I did not need any wire from the truck for the backup camera. The camera has three wires - black and red go to the reverse light wire and ground ... The power to the reverse lamps is a white wire with a light green tracer. I attached the wiring schematic for the backup lamp circuit below.