Essential Guide to Backup Light Colors Ensuring Nighttime Visibility

Need to know what color, and a location, of the wire that comes from the reverse light bulb (black/pink). In the cab or close by would be ideal. Here's the wiring diagram. Should be blue with a red stripe for hot and white with a black stripe for ground. There are 2 wires that are white with green tracers, the one with the light green tracer is the correct wire. The color of the light from a backup light shall be white, in accordance with regulations. Backup lights must not be continuously lit when the vehicle is in ... Reverse lights do have to be white...marker lights and turn signals can not be blue, red, or bright white...as these are emergency colors. Orange/Yellow IS hot, key on. Red/Black run to the Transaxle Range Switch. When placed in reverse, Transaxle Range Switch sends the circuit to ground, ... This link should take you to the installation instructions for a set of sequential turn signals and shows how to remove the rear tail lights. The grey with brown stripe is for the trailer connector reverse lights and go through a relay in the BJB and fed from fuse 70 (F70) that is in ... 2013 Boxster S, MT USA Spec. Can someone confirm what wires are for the reverse light and ground in the trunk? There is a blue/wht wire and a black wire going to the back up light. I assume the blue wire is the positive and black is the ground. Is that correct?