Ignition Switch Mystery Why It's Left Out in the Cold?

Another guy with a c class had a posted elsewhere on the forum with the same problem and a helpful forum member said it might either be that the ... It's probably the steering column lock. Move the steering wheel left or right slighty to unock it and turn the key. Go to channel · How to Simple Key Switch Test. Sartin ... How To Get The Right Ignition Switch For Your Lawn Tractor & Avoid Costly Damage! The ignition should be no voltage also. Here is a pic of the fuse panel. That ignition lug is supplied power by one of these relays. I just ... I could be the ignition switch but more likely the slave relay or solenoid. The slave is there to allow you to have a lesser gauge wire from the ignition ... If not, replace the switch. Some switches have multiple positions so you need to make sure you are on the correct pin to the ignition. Another ... I turned the key in the ignition and nothing happened. My ... Whatever energy remains in the batter is available right away, and doesn't ... The ignition switches on these fall apart. Basically, you have to grind off the two safety bolts that hold the ignition switch on and replace ... I found that "tilted down a little" is the preferred way but I had to remove the lower panel again to get it right. With the steering lock back ... gonna be tumblers or tumbler housing. Clean it out well. Take a large paper clip and insert it in the lock cylinder and wiggle it also after you ...