Ignition Switch Dilemma Leftward Resistance Diagnosed

If the chime works as it should when the key is left in the ignition switch after a successful drive, then the next time the car won't start and ... I found that "tilted down a little" is the preferred way but I had to remove the lower panel again to get it right. With the steering lock back ... ... switch won't turn, the easy way to get it to turn is to feel the tension on the steering wheel by trying to turn it left and right, and you ... If the key is not in the close proximity to that ring the car will turn over but will not start. Fortunately I didn't destroy that electronic ... It could be a worn key or just sticky tumbles, wafers to be technical. I mended mine when it was behaving like this, by removing it as you have ... In today's video, Jake delves into the crucial role of the ignition switch in your vehicle, how it operates, the various symptoms indicating ... No sound at all when turning the key. The lights and horn don't even work when key is in RUN position. I am assuming a bad ignition switch. I ... Try to spray some lubricant in the keyed lock cylinder and see if that may help frees it up if so, you can then remove it and see if it turns freely outside of ... Chances are either a bad key like its grooves have been over rubbed or a bad ignition lock cylinder, meaning the tumblers inside the cylinder have become worn. Turning the key, the console lights stay off, the headlight doesn't come on and the starter won't fire. The battery tests fine. What from ...