Ignition Switch Enigma Why It's Ignoring the Leftward Path?

Anyone having this problem: remove the shift knob so you see just the lever and button and try to fully turn the car off and take the key out again. If you have ... Another guy with a c class had a posted elsewhere on the forum with the same problem and a helpful forum member said it might either be that the ... The factory ignition switch will need a jumper wire between Ign1 and Ign2 post on your starter switch in order for the coil to have power while ... I changed the ignition barrel and the key still would not turn. So, I took my old one home, drank a couple beers and disassembled it. I found ... It's probably the steering column lock. Move the steering wheel left or right slighty to unock it and turn the key. I get back in my car, and the key will not turn to the right. I try ... doesn't get one signal after another it won't start the engine ... gonna be tumblers or tumbler housing. Clean it out well. Take a large paper clip and insert it in the lock cylinder and wiggle it also after you ... The ignition should be no voltage also. Here is a pic of the fuse panel. That ignition lug is supplied power by one of these relays. I just ... I found that "tilted down a little" is the preferred way but I had to remove the lower panel again to get it right. With the steering lock back ... Now check the main fuse and wiring to the ignition switch for power. Check that power goes through the ignition switch when it is turned on.