Troubleshooting P0335 A Step-by-Step Guide to Fixing Crankshaft Sensor Issues

In this episode we'll be testing the Crankshaft Position Sensor (POS) regarding trouble codes P0335 and P1336. The Crankshaft Position ... 4G TL Problems & Fixes - Help with engine code P0335 - I need opinions/help Recently replaced my oil pan due to mechanic before stripped my ... I recently replaced the Crankshaft position sensor on my 2.4 L 2012 SXT. I bought a replacement part from Advance Auto (a car quest part) and my car's ... The P0335 is fairly new. P0035 says crankshaft position sensor A circuit, and P0051 is heater control circuit bank 2 sensor 1. The other day, it ... That's definitely a CPS code. Usually only happens if the sensor is shorted or open circuit. Double check there isn't a problem with the harness ... The code started after replacing the Cam position sensor (as you post seems to suggest), I would first suspect a bad sensor. Switch out with the old one. This code sets when the ECM does not see the CKP pulse signal during a four-second period while cranking. With no CKP signal, the engine would not start. The car starts, it drives, but the only problem is that it has a P0335 (Crank sensor no signal) code - meaning I can't go above 3k rpms, along with being stuck ... Check the crank position sensor wires. It is the triangular plug on the acc. side of the engine near the O2 sensor plugs. The wire runs straight ... The code is "Crankshaft position sensor circuit". Well the circuit involves more components than just the sensor. It also includes a 5V supply ...