Conquering P0335 A Step-by-Step Guide to Fixing Crankshaft Sensor Errors

The P0335 code is critical because the crankshaft position sensor directly affects engine timing and synchronization. Check the crank position sensor wires. It is the triangular plug on the acc. side of the engine near the O2 sensor plugs. The wire runs straight ... P0335 Chrysler - Crankshaft Position Sensor. Possible causes - Faulty crankshaft position sensor - Crankshaft position sensor harness is open or shorted. It sounds like the CPS is bad and that can cause random stalling, failure to start, etc. The rattling is likely another problem. The P0335 is fairly new. P0035 says crankshaft position sensor A circuit, and P0051 is heater control circuit bank 2 sensor 1. The other day, it ... I have a 2013X. I replaced the crankshaft sensor with a oem part and changed the wire harness, because the connector was corroded. That's definitely a CPS code. Usually only happens if the sensor is shorted or open circuit. Double check there isn't a problem with the harness ... The code started after replacing the Cam position sensor (as you post seems to suggest), I would first suspect a bad sensor. Switch out with the old one. The code that came up was P0335 when I ran my scanner so I searched the forums and found it was a crank position sensor issue. I ended up ... Mercedes E Class - P0335 - Recently my wife's 2005 E320 displayed the check engine light. I hooked up the scanner tool which showed a P0335 ...