P0335 Solved A Comprehensive Guide to Resolving Crankshaft Sensor Malfunctions

This P0335 code pops up, I noticed it says “circuit” is the wire itself that connects to the sensor or do I need another sensor. The P0335 code by itself can indicate a problem with the CKP sensor or with the battery/ground connection. I've been looking for the sensor. This is for the V6. I think one end is under the engine cover and the other is where the transmission meets the engine on the ... The crankshaft position sensor is the primary part for P0335, but the camshaft position sensor is the secondary part for P0335. Sometimes the ... P0335 is a crankshaft position sensor circuit code, not necessarily the sensor itself. Check the connector for corrosion and wiring to the connector. I replaced the crankshaft position sensor, checked for voltage as well and it reads 12 Volts on the power side, less than 1 volt on the ground side and 0.03 ... This video gave me the best clue to the problem. there are TWO sensors. One generates a P0335 code, and one generates a P0340 code. A code P0335 could mean one or more of the following has happened: a wire or connector in the circuit could be grounded/shorted/broken, the camshaft position ... At the sensor the signal was good but when I checked it up at the firewall connection the signal was degraded to the point of being almost ... P0335: Crankshaft Position Sensor “A” Circuit Malfunction ... 2GR-FE engine's Crankshaft Position Sensor (CPS) is located toward the front of the ...