Igniting Innovation Revolutionary Techniques for Removing Crimped Fuel Lines

Put the hose end against something flat and push- like you're trying to force the hose back through the fitting. The key is the ferrule must come out. We bent the original ring taking it off. You can purchase a replacement for about $15 IIRC. Pull that plastic piece up. The hose removes ... just take it off and go down to your local auto parts store and match it up for length and size. they all stock an assotment of sizes and length ... I was worried this would either pinch/tear the hose or damage the fuel line. My solution to this was to purchase a battery lug crimper which has ... I had to clip the tie to get the fitting off to remove the tank from the boat, and I'm trying to figure out among my options what is sensible. Cut the rubber hose off the quick disconnect fitting and cut the metal crimp end off. Use high pressure hose and high pressure clamps to ... Yes you can cut & peel off the outer shell. It likely attaches to the tube, like a Coll-O-Crimp. If so, just cut it away from the tube. For ... ... how to replace the entire OEM fuel line. I also show you how to lower the gas tank if you need to remove the fuel feed, return or vent lines ... My approach is to try to replace the hose itself. I was able to remove the crimped sleeve by cutting it open using a Dremmel and abrasive disk. A strap wrench should be able to easily take the filter off. Any tighter than that and it is too much. If you bent the line that goes from the ...