Unlock the Secrets of Crimped Fuel Line Removal with Ease

Yes you can cut & peel off the outer shell. It likely attaches to the tube, like a Coll-O-Crimp. If so, just cut it away from the tube. For ... Grab the pinch point and twist it off until it breaks. You could use channel locks or anything you got to get a good grip. This is Louise's engine ('69 coupe) minutes after being removed for the first time ever - last winter. I have no reason to doubt the originality ... Also use line wrenches on the fittings. On the carb it's a 1 inch nut, or you can make do with an adjustable wrench. If there really seized up I ... simply clamp down on the line, slide the loop back and your good to go. nice thing is that you can put them in place BEFORE removing the line. Any tricks to share for removing Oetiker-style hose clamps? I need to remove the old high-pressure fuel line, and tried various pliers combinations today with ... You need the special hose clip pliers. You use it to remove those clips and to re-install them. I got the tool from Amazon. Pry it open a little with a small screw driver, just enough to twist and pull the old quick disconnect out. You will need a clamp crimp tool to ... just take it off and go down to your local auto parts store and match it up for length and size. they all stock an assotment of sizes and length ... Cut the rubber hose off the quick disconnect fitting and cut the metal crimp end off. Use high pressure hose and high pressure clamps to ...