Revolutionize Fuel Line Removal Expert Techniques for Uncrimping

Have a crazy idea to use the brass fittings and crimping tool to crimp gas rated fuel line and fittings. Talking about the brass sleeve surrounding the hose. If they're like BMW crimp clamps just cut them off with a wirecutter. The clamp, not the hose. I've even had pretty good success, where I had ... My approach is to try to replace the hose itself. I was able to remove the crimped sleeve by cutting it open using a Dremmel and abrasive disk. C'mon man, you could replace the hose and the clamp for less than $2.00 probably. ... I would look at all hoses and fuel and vacuum hoses. ... to remove the old hose clamps from the injection pump and fuel filter 2 ... The fuel line and crimp clamp must be beyond the barb, as shown above. 9)If ... ... crimp hose to the fuel supply hardline in ... I removed the OEM hose, cut the fitting off of it, and used it with my auto store fuel line. I ended up buying a Milton crimping tool 1626. Not cheap but delivered the right result (and does 5 sizes - good for oil lines too) It will have a spring on it. Cut the end off and remove the spring to use as a tool when making you bends. By sliding it over the bend area it ... Pinch hose clamps look like a metal ring with square-shaped holes in them and a protruding metal ear, which creates tension on the tubing when crimped. I've used a flat blade screw drive into the knob part then needle nose pliers to spread it further to allow pulling the hose of the fitting.