Eliminating Frustration A Simplified Guide to Removing Crimped Fuel Lines

Is there a know source for the crimping tool that Porsche, (and others) used on fuel and oil lines. I saw one at Roock Racing in Germany ... I used a small flathead to pry it open just enough to slip the hose off the barb connector. Then I used some dikes (or *****) to crimp it back to a clamped ... It can be a challenge to remove the fuel line from the filters, and that a spreader tool can help. And I would also need some sort of clamps to pinch the fuel ... Search for fuel hose ferrules or crimping ferrules. 'ferrule' is what that brass bit is called. just need to find the right diameter ferrule for the hose. +1 on cutting off the ferrule and replacing with CARB line and good clamp. Cheaper and field-serviceable. I am doing this to every crimped fuel ... 15:58 Go to channel How to remove (or replace!) fuel lines & fittings | Audi VW | S4 Figure It Audi•11K views Any tricks to share for removing Oetiker-style hose clamps? I need to remove the old high-pressure fuel line, and tried various pliers combinations today with ... Once the ring is split, it can be bent away from the injector. Either the FI style hose clamps or Oetiker clamps will work. Oetiker's may take a ... you can clamp it shut with any type of flat clamp, to stop fuel flow. Then you can remove the steel line, flush it with water, then hacksaw it ... 62Pcs 7 Sizes 304 Stainless Steel Single Ear Hose Clamps 6-23.5mm Crimp Hose Clamps Assortment Kit Perfect for Automotive/Home Appliance/Water Pipe and Fuel ...