Automotive Savvy Unlocking the Secrets of Crimped Fuel Line Removal

Removing fuel line clip/clamp. Jump to Latest. 2.8K views 3 ... Replacement type Crimp Type Hose Clamp 15/32 · hose crimp clip | eBay. Mercury Fuel line Clamp Removal/Install Tool. Thread starter ... Crimp o clips and I just use wire cutters to close them as well,but ... My approach is to try to replace the hose itself. I was able to remove the crimped sleeve by cutting it open using a Dremmel and abrasive disk. side cutters work fine if you go slow and it helps to flip the cutters to the other side to finish the crimp to make it even. note - you can get ... First of all, I would triple-check that you have the correct replacement hose. If you are confident that you do, you would need to remove that ... I used a small flathead to pry it open just enough to slip the hose off the barb connector. Then I used some dikes (or *****) to crimp it back to a clamped ... Video tutorial on how to cut a single ear or double ear crimp style hose clamp. I do show a couple different methods in this tutorial, ... Put the hose end against something flat and push- like you're trying to force the hose back through the fitting. The key is the ferrule must come out. The other end has a crimp collar onto the hard line. Slice the collar crimp and peal it back to remove the flex line from the hard line. Normally I use a small screw driver and pry enough slack in the clamp to slide it off. With the plastic fuel line, brittle plastic hanger for ...