Injection Pump Pumping Woes A Detailed Troubleshooting Guide

The fault is not in our senders, But in ourselves. W. Shakespeare, SAE Master Technician Globe Garage, London. I just installed a mechanical pump on my 350, and nothing is pumping out of it, brand new output line, the filter is new as well and sits right before the ... try cracking the steel lines at the injector pump just to see if your clog is the lines or the pump. could just be air lock and your lift pump ... Take the solenoid out and remove the plunger so it lets fuel pass. Then reinstall without the plunger and start the engine and see if it runs. Several things, including a failed pump, a clogged filter, or a kinked or blocked fuel line, can cause this. If your car is not getting enough ... - If the injection pump has a fuel solenoid, ensure that it is receiving power and functioning correctly. A faulty solenoid can prevent fuel ... Also check for air leaks on the suction side of the pump. If you are using the glass bowl fuel filter, they are susceptible to warping where the ... This website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent. Try pulling the wire connector apart and test the leads, there will be an orange and black (the 2 thicker wires) wires to the pump. Make sure ... Imho the pump needs to be assembled before fitting to the engine. Because you need to push the lever/foot up and keep it in position while ...