Key Not Releasing from Ignition Cylinder Diagnose and Fix the Issue Efficiently

And yes, if the battery dies in the Cruze, the key will not come out of the ignition. The ignition release for the car being in park is ... Use your left index finger to push down on your key cylinder. At the same time, jiggle your key with your right hand. This can loosen springs ... But if the pin is just stuck for mechanical reasons, sometimes physical force can get it to release. So, try moving the steering wheel back and ... Try rotating the steering wheel back and forth while gently turning the key. Ensure that the battery is not dead. If you are still unable to ... Sometimes the linkage to the transmission can be a little off. Next time it happens try jiggling the shifter towards PARK and removing the key. Comments57 ; KEY WON'T TURN IN IGNITION-HOW TO FIX IT. Despair Repair · 1.3M views ; BREAKING NEWS: TOMMY ROBINSON SPEAKS FROM PRISON [FULL AUDIO]. My key has been stuck in the ignition in the 'on' position and wont come out. I can turn on the car with on with no problem but when i turn it off, i just cant ... The key release is a solenoid activated by a switch in the shifter. Either the switch is going bad or there is lint or dirt in the shifter gate preventing it ... There is a little tab on the ring surrounding where the key goes in - pop it off to reveal a little hole. Stick a paper clip in it and release ... If your vehicle is not in Park (P) mode, the ignition system may not release the key. This safety feature prevents the key from being removed ...