Ignition Key Not Releasing The Ultimate Troubleshooting Guide

You can try this out on a working lock: Turn off the ignition, leave the key in, put tension on the steering wheel then try removing the key, it ... This happens from normal wear sometimes but sometimes it can be caused by a worn key that is no longer cut to factory specifications or a miscut ... The reason it won't let you go all the way to the key removal position is that either the vehicle doesn't recognize that the transmission is in Park. I'd put a few squirts of lubricant like WD 40 in along side the key first to loosen those pins. If this don't work, I have no other ideas other ... A shot of oil in the lock cylinder may help. DO NOT USE GRAPHITE! Use a light oil, such as wd40, pBlaster, Houdini, etc. But yes, if the ... once you find the key wont remove while in park, leave it in park and flick the lever switch that you normally press to change gears from park ... First, make sure your battery cables are clean and tight. Second, try jumping it with another vehicle. To remove the key try moving the steering ... The locking pins release with current flow from a solenoid inside the E415 ignition key slot. So the E415 must have power to release the key. No ... Your steering wheel probably locked up. Turn the wheel left and right while turning the key in the ignition on/off. When you put the vehicle into park it's not releasing the solenoid the locks the key into the ignition. Some have cleaned the switch and lubed ...