Troubleshooting Guide Removing a Seat with a Dead Motor

Somewhere on the internet someone posted pictures of doing this but I did not find them quickly. I have found this tapping on both sides of the ... I know the motor is good. Just wondering if there is a way to manually spin the cable to get the seat moved or maybe hook a 12 volt source to ... Audi 100 / A6 (C4 Platform) - How to remove dead power seat - I am searching but so far not having any luck find a method. So...the motor on my power drivers seat broke and my seat no longer goes ... if that thing is dead, chances are the seat will also be dead. The seat will only move if powered. Normally, you power the seat forward, remove the two back bolts then power the seat back to remove the two front bolts. There really isn't a way to manually crank them. If you look under the seat, you can see the screw drives that move the seats around. I'm thinking that I can remove the cover and try to super glue it. The worst case is, I might have to replace the control itself if I can't just ... Quite frankly I was amazed there was no death grip type of fastener on plug, just a plain slip in plug. ... If you are keen, why not remove the ... I didn't try to remove the motors because mine work OK. It sounds like you have a stripped nut. If I were you, I'd just replace the whole frame. check to motor under the seats , its probably dead, it pulls out, so fairly easy to test when out, there will be two rods that come out of it ...