Master the Art of Removing a Seat with a Disabled Motor

from the car, but my fwd/back motor is dead!! Therefore I can't reach the rear bolts of the seat to remove it....The driver's seat works fine.. No , you can take a wrench and manually wrench the seat forward ( will take a while but it works)... or you can just take a battery and wire up ... If you pull out the torx bolts, the slider will detach from the motor screw drive and the seat can manually be slid forwards and backwards. This ... If you were just using battery, as it was being used the voltage drops ... 9655636 - Motor for Seat Fore/Aft Adjustment B1355 54 [009] ... If you do this, once you pull the helix cable from the housing, you can clamp in a cordless drill and use the drill to perfectly align the seat. There really isn't a way to manually crank them. If you look under the seat, you can see the screw drives that move the seats around. It may be the same as several other motors for several model years? Web is easier now if you have info on the motor search. If going to a ... Each pull out seperatly , I took one off ran the motor and half the seat moved , did the other half and the whole thing moved again. Seems like ... If you cant get to the connector and can unplugg it for some reason i would cut the wires to the motor and give it some power directly on the ... Do u plan on reusing seat? If not demo seat bottom (remove cover and foam) that might get you better access. last resort is reciprocating ...