Top Brake Light Illumination Unveiling the Causes and Solutions

This sounds like the ABS control module is back feeding the third brake light here is a wiring diagrams so you can see how it works and a video ... Also check the brake fluid level see if it is too low. I remember too low brake fluid level will also turn the warning light on. Top ... The most common cause for brake lights not turning off is a stuck brake pedal. If the pedal doesn't come back up all the way when you take your foot off, it ... Are the tail light bulbs dual filament with the brake lights using same bulb, are you sure both bulbs are in sockets properly and not bridging ... It seems to me that you may have an issue with the brake light switch. I have seen it before where the switch fails internally and provides ... next time you see this and before doing anything else reach in and pull up on the brake petal and see if it goes off..could be a sticky/ out of ... Background: My third brake light molding brackets have been broken for several years due to being opened with ice frozen on the top molding/roof ... My 3rd brake light was on, not full bright, but maybe 25-50% of its power. When I apply brake, it came 100% with 2 side brake light and when I release brake ... Sounds like it might be a bad brake light switch. I would take a look at that. I would bet that if you disconnect it the lights will go out. On your brake pedal there is a little plastic grommet that contacts the switch to activate the brake lights when you press on the pedal. It has ...