Fumoto Plastic Hose Barb A Comprehensive Analysis of Its Shortcomings

It was a little tricky to snake the plastic suction tube down the ... It was so easy to measure with dipstick, add a piece of tape to the sucking ... I installed a Fumoto valve and now consider it to have been a waste of money. First, it has such a small diameter drain hole and tube that it ... Plastic lined on one side and absorbent pad on the other . ... Fumoto valves are nice, but you can ... What helps even more is having a hose Barb on the ... To use a Fumoto valve on the 2.7, you would need an adapter with a spiral groove on one end and threads on the other end. Scion tC 1G Drivetrain & Power - Removing stock Oil Pan? - In the process of Turbo, and was wondering, what's the easiest way to remove the ... The hose method sound just as 'messy' as using a drain pan. The ... Fumoto valve in place of the crankcase plug. If you get the one ... The size is 16mm-1.5, and there's a Fumoto valve with hose adapter that fits: ... Plan B: I inserted a 3/16" hard plastic tube (vacuum tube) ... This should get 99% of the oil out. I found if you stick the tube in, it will only suck oil 'locally' ... I still plan fitting a Stahlbus or ... With the Fumoto and a hose, it's always a clean oil change. Click to ... Use a flat blade screwdrivwer to pry off the 3 plastic rivets and pivot ... I wonder if a fumoto valve would work? I have one on my truck and ... tube that is pushed down thru the dipstick tube to suck the oil out.