Unlocking the Secrets How to Replace a 2012 Rear Passenger Bearing Hub

I didn't think that was worth it. You need to press the old part out and press it into the new hub assembly. Don't try to use a hammer to ... Loosen the four bolts holding the hub but don't remove them. Leave the axle nut in place and use the slide hammer. Once it breaks free a little ... The front ones come with the bearing installed. The rears don't and you need a special tool to pull the bearing out. you need the bearing with the ABS ring, the colar, seals, dissassemble rear brakes, pull the axles, cut off the old collar, use special tool to ... 3. Remove the cotter pin (2) from the hub nut (3) on the end of the axle half shaft. 4. While a helper applies ... The wheel bearing will slide off at this point; replace it with a new one and re-install the nut. You will need to de-stake the nut before ... step 9. pop new hub on. (may need a tap with the bit of wood and hammer from earlier). replace the hub bolt (m18 spline) make ... This video shows you how to install a new wheel hub and bearing on your 2007-2017 Ford Expedition. This video shows you how to install new rear wheel bearing & hub assemblies from TRQ on your 2008-2020 Dodge Grand Caravan. Attach a slide hammer to the lugnuts and give it a couple solid hits to pull the hub out (it's easiest to do this on the car). Name: Picture107.