Essential Guide Replacing a Rear Passenger Bearing Hub in a 2012 Model

To remove it just remove the wheel, hub nut and split pin and brake caliper. It should pull off fairly easily by hand. Just make sure you ... found a write up for removing front bearings, knuckles have to come off. So for rear with AWD I'm assuming the same. Passenger side saturday, ... This is for a 2012 Focus with rear disc brakes. ... On the way home my rear passenger wheel bearing gave up the... 5 2.7 ... I just had a wheel bearing that went out in the rear and VW wants $285 for just the one wheel bearing/hub assembly. I have done a fair amount of ... Buy AutoShack Rear Wheel Hub Bearing Pair of 2 Driver and Passenger Side Replacement for 2004-2012 2013 Mazda 3 2009-2013 Mazda 3 Sport 2006-2010 2012-2017 ... I can hear noise related to bearings from passenger side. But I cannot tell if it is front or rear. But my daughter's ears are better and she ... Buy Now! New Wheel Bearing & Hub Assembly from 1AAuto.com https://trq.video/ia-1ASHR00172 New Wheel Bearing & Hub Assembly Set from ... Loosen the four bolts holding the hub but don't remove them. Leave the axle nut in place and use the slide hammer. Once it breaks free a little ... ... 2012 Buick LaCrosse 2013 Buick LaCrosse 2014 Buick LaCrosse 2015 Buick LaCrosse 2016 Buick LaCrosse Tools you will need: • 21mm wrench ... I didn't think that was worth it. You need to press the old part out and press it into the new hub assembly. Don't try to use a hammer to ...