Unlock the Secrets of Steering U-Joint Indexing A Guide for Mechanics

My Mustang II U Joint finally arrived, so it's time to get some steering on my Chevrolet Coupe. If you're looking for a project for your vehicle, take a look at the steering couplers and shafts in your steering system. Place a vice grip on the shafts below and above the U joints, if there is slop, you need to replace it. Changed mine last year, trued to put a ... This can aslo be caused by the bottom U joint not being tightened down on the spine of the steering rack. Check the bolt at the bottom to make ... iPd has what appears to be a ScanTech lower steering U-joint (only 2 stakes on the cross shaft caps) but it's 10 days out according to their ... When using the borgeson steering column u joints, are you supposed to drill a recess into the colum, dd shaft and gear box splines for the ... When I built my Willys I used a steering shaft from a 5 ton truck cut down, look at the big truck wrecking yards. The U joints are baby Spicer ( ... If you google steering phasing, some believe you keep the u-joints in phase others say they have to be out of phase 15-45 degrees... Heavy Metal ... Pull the bolt out of the steering column at the top joint, turn slow and carefully and see if binding stops, and look for up/ down movement of that joint on ... Is it possible to change just the u-joint out on the steering shaft of the vehicle listed above? Or do I need to just replace the entire ...