Unlock Optimal Steering Performance A Guide to Indexing U-Joints

Jefferson Bryant of Red Dirt Rodz shows you how to adjust the steering linkage for Speed Direct's Steeroids rack and pinion conversion ... Working on tighening up the front end of my CJ7, I'm now on the steering shaft. There is a lot of play in the universal joint near the brake ... MidnightBurn's specs); it has a Saginaw power steering box- all the hoses are in. I have a 3/4" steering universal joint at the end of the ... 17) maneuver the joint and shaft back down into the lower engine bay near the rack, moving the steering column as needed forward and backwards. 20:50 Go to channel Toyota 4Runner Steering Shaft Replacement - Intermediate Steering Shaft - U-Joint - 4th Gen Enigma Engineering Place a vice grip on the shafts below and above the U joints, if there is slop, you need to replace it. Changed mine last year, trued to put a ... Does anyone know the part number for the steering shaft u joint where it meets the rack. Thats where my steering has its slop. Can am only shows the whole ... An a carrier for the steering shaft is often needed when more than 2 u-joints are used in a set-up. Does a double joint count as 2? I did, only 1 side, u-joint at steering wheel end of shaft. Tried lubing and working lube into u-joint. Worked it about 10 minutes. Didn't make a difference so ... If this happens, index the u-joints two or three splines in one direction. The hard spot should disappear or be minimized. 5. Install the shaft or joint on the ...