The Ultimate Guide to Steering U-Joint Indexing Precision and Performance

New replacement steering shaft U-joint. This U-joint is not a direct fit but is the closest thing on the market to fitting. .570", 28 spline on one end and a ... Is it possible to change just the u-joint out on the steering shaft of the vehicle listed above? Or do I need to just replace the entire ... Anyone heard about using one of these on a bike for steering? From the beginning, I've wanted to build a recumbent bike, ... A bad u-joint can lead to stiff and heavy steering feel. I definitely have this, but have attributed it to my 35" tires and 1.25" spacers. The shaft is also 1", and slides over the upper shaft (rectangular). I can't count the splines since there is a huge flat spot for indexing. I ... Normally when, on an untouched car, the column is unbolted you can just pull that coupling apart. It is not "loose" but it isn't big wrench ... Cuz the ground clamp should be on the same side as the weld so the current doesn't flow thru the u-joint possibly arcing thru the needle ... Easiest way to fix it is with a 12mm socket, about a foot long extension and a ratchet. Just tighten it up a bit, it will take a bit of force. I'm not sure, but it could be the same size for our trucks, but I bet you can find a u-joint that fits the bill. First, I removed steering shaft ... I liked it up and reinstalled it anyway. Have oil in the steering rack has made a noticeable difference though! We usually clean notchy, or not, ...