Precision Steering U-Joint Indexing The Essential Guide for Enhanced Handling

The notchiness is a pretty good sign that the joint is messed up. You would have to disconnect and flex the ends to really isolate it though. Most likely will have to take them apart and compare by measureling to Spicer PTO u joints. So strange for them to be loose as they get very little rotation ... The garage said it needed a new U-joint, and it might be covered under a recall. When I googled it, the fact that the steering coupler goes bad is really ... He is open to the idea of producing his steering u-joint spined for the Z's rack, which has 28 splines at about .560" diameter. At present, ... An a carrier for the steering shaft is often needed when more than 2 u-joints are used in a set-up. Does a double joint count as 2? The VW U joints are pretty sloppy if you ask me. Not only do the spines only go a short way into the U joint but there's a lot of slop in the ... Find ppictures, count splines. They changed based on specific year, even within the generation, and changed based on whether the rack was ... ... universal joint. It's the angle of the joint which will cause a sinusoidal change in shaft speed through each rotation. If the shafts are ... I'm not sure, but it could be the same size for our trucks, but I bet you can find a u-joint that fits the bill. First, I removed steering shaft ... if your sure its straight go for it or you could relocate it to somewhere more convenient. only thing to know is make sure you dont excede the ...