Conquer Brake Pedal Problems Master the Fix for Brakes Going to Floor

Look for fluid leaks at the hoses and calipers or wheel cylinders, and make sure the brakes are mechanically moving as they should when the pedal is pressed. Release it and/or pump it and it comes back to normal. It's usually the result of the piston seal failing, catch it just right and the seal ... First thing is check the level of the fluid in the brake reservoir. If low, I'd suspect a leak. Check all the wheels for leaks at the calipers/cylinders. Full Access Member ... A bad booster won't cause a low pedal, just the opposite. The pedal will be hard and high. OP says it's going to the floor. Is your brake pedal sinking all the way to the floor when you press it? Does it feel softer than normal, or spongy? Wagner Brakes recommends the following procedure to find out if the problem is a bad master cylinder or a leaky EH valve in the RWAL system. The brake pedal will ever so slowly descend down while waiting for the light to change ( my brake fluid levels are stable/fine) any one have idea on what this ... It sounds like you have an internal leak in your brake master cylinder. With steady pressure the brake pedal should not move, if it does then it ... It's the ABS kicking in and the computer taking away the pedal. I've experienced this a few times while driving in winter conditions in North Dakota. Basically there's four things that can cause the brake pedal to go to the floor. 1. Air in the Brake Lines 2. Brake Fluid Leaking 3. Brake Booster Is Failing ...