Tappet Wearout The Stealthy HPFP Destroyer

... OUT THIS GAMING CHANNEL http://www.twitch.tv/alucard9027 www.facebook.com/alucard9027 Due to factors beyond the control of JoeTheAutoGuy, it ... Biodiesel deposits may form in the high-pressure fuel pump of trucks equipped with diesel engines, according to the NHTSA. ... high pressure fuel pump. As a result, the friction between the fuel pump parts will cause them to wear out even faster to the point of failing. Out of commission for over 2 months, hope to have back next week. Loved it til it lost oil pressure, lifter body failure, known problem. Was ... Ford says the deposits will form on the pump drivetrain roller and inside the tappet body cooling passages, where they'll increase wear on the ... On my 2018 the bolts that hold the HPFP down have sheared off TWICE now. First time was about 200 miles ago, and about 2k after the cam phaser ... The shop manual indicates this may happen to the HPFP when reattaching the pump. The directions are to insure the flat part of the cam lobe is at the top. ... wear item with a longer service interval ... Unlike some issues, a failing high-pressure fuel pump makes itself apparent on the way out. ... back of it first. (You can also just buy the sensor, 2 rubber lines ... (keep your eye out for leaks) h. You have now flushed your tank and lines of ... Ive seen too many of these being replaced for wear. If they are wearing out, with a stock pump, you likely have a cam material issue. Its ...