Invest in Your Vehicle's Health with CV Boot Replacement

There are a couple of things that you need to do when you are making the repair. 1. Use a solid cv boot. Not one of the glue together boots. The quickest/cheapest fix is to swap the whole axle assembly for a rebuilt axle. Since the boot has been torn the CV joint will be contaminated ... You don't have to remove the outer CV's if you don't want to. The inner's (closest to the tranny) are the key and you can get both boots off ... If you hear any noise while driving or turning then you should replace the entire axle. On step 7 there is some extra instructions on what to do if replacing ... I'd just get a Cardone new axle for $36.79 + tax and shipping with lifetime warranty instead. 2 Beck Arnley boots will run you about $25 + tax and shipping. Just do both boots & re grease. The boot kit should come with the correct grease. The outer CV uses a different grease to the inner, so make sure you get that ... The inner CV's don't have any side loads put on them the way the outer CV's do, all they essentially do is spin in one axis. The work involved ... "Split Boot"*: If you haven't encountered one, it's a CV boot that wraps around the axle and is glued together on one side. I've found a " ... Usually to replace a CV boot you need to remove the driveshaft and then disassemble the CV joint to put the new boot on. If you look inside the outer CV assembly, you will see a small circlip. Using a screwdriver, spread the circlip and pull the end assembly from ...