Fix Your CV Boots Today, Save Tomorrow

To do what you described you'd need to get the boot over the outer CV. Most boots have a limit of about 3.5", which is not big enough to go over ... But, if you need a new one, we have plenty of options available ... How To Restoration Drive Shaft & CV Joint Inner End Outer Boots Change. Be careful not to damage the rubber boot on the ball joint. It is possible to replace the outer boot by doing what you are and removing the ... To replace the outer boots you have to remove the inner CV joint. It's really messy, but the good news is that you don't have to mess with the ... You don't have to remove the outer CV's if you don't want to. The inner's (closest to the tranny) are the key and you can get both boots off ... If you can take the axle out, you can reboot it, you might need ... Inner boot is often neoprene, Outer boot is thermoplastic. At least ... I rolled the baggie around the axle - Ziplock end toward the outer CV joint (this gives you something to grip onto when pulling the boot on). Name: 33 inner ... The driveaxle has inner and outer constant velocity (CV) joints which are greased and covered by rubber boots. CV boots on these cars have a history of early ... ... replacement inner and outer clamps that you can try. Have ... If you're going to reboot your CV axles, you should also replace the ... From there, you remove the inner CV joint from the shaft allowing you to replace both boots. Add additional grease as needed, then button ...