Timing Cover Removal Secrets The Ultimate Guide for Mechanics

CAREFULLY pry around the edges of the cover with a flat head screwdriver.If you have removed all the bolts it should come loose. The crank "race ... Nope.. just take out the 2 maybe 3 bolts that go into the timing chain cover.. the gasket kit well come to 2 small pieces of cork gaskets to ... You will have to support the front of the engine in order to remove the timing cover. You do not have to pull the oil pan. That front section of ... Remove radiator to gain better access. Remove starter dog and crankshaft pulley. Remove bolts holding timing chain cover in place. NB the bolts are different ... The pan will need to be dropped. Good thing is that the pan gasket is the re-usable kind, so drop it down a little and put it back up when done. All you have to do is unbolt the front two bolts on the oil pan to release pressure on the timing chain cover enough to slip it out. The procedures to replace timing chain in FSM call for removing/lifting the engine with a hoist, plus power steering pump. Veteran Member. Remove all oil pan bolts and leave the 2 rears loose and you'll be able to remove the timing cover. To replace the timing cover on the 3rd Generation is an a time consuming job, but can be done home with the proper tools. First thing to do is unhook the ... to remove the outter case, remove all the bolts on the timing case, plus those inside the the oil pan, thats it. Then use a flat head and start ...