Starter Power The Ultimate Guide to Engine Ignition Dominance

If there is no power to the small solenoid wire then you need to test the starter relay, the contacts inside the relay could be dirty. The live terminal on the battery is connected by a heavy lead to a terminal on the solenoid switch which is operated when the ignition switch is turned. The ... I am getting current, but I do not get 12v to the solenoid when I turn the key. I hear the fuel pump prime. All the dash warning lights come on. The only way the starter will turn over is to jump it from the solenoid to the hot wire from the battery. With the key on or off starter engages engine turns ... Try running a heavy enough gauge wire from the starter solenoid relay to the purple wire connection, then try starting. This would rule out a ... Share your videos with friends, family, and the world. There are four posts on the starter relay. The two large posts carry the 12v from the battery to the starter through the relay. The two small ... They make dummy relays, but they can end up in heartache. You could find one and it by passes the relay entirely but just plugs in where the ... If the small terminals on the starter relay are unplugged and you still have the starter try to engage when you hook up the battery then the ... This new starter worked for a day and a half and now when trying to start the car the sterter whines and spins but the bendex doesn't engage.