Igniting Innovation The Latest Advancements in Starter Motor Technology

It only works if i jump it at the solenoid. everything else ignition related works fine. and i get power in the large red/black wire from the ignition in the ... The starter solenoid is bad on my 966. It started several weeks ago clicking but not starting. It feels like the Ben fix is pulling in but the starter motor ... When the starter receives the electrical current from the battery, a small gear extends out of the starter and engages the vehicle's flywheel. The small gear ... Take a small jumper wire from the battery"+" to the small terminal on the solenoid (there may be two, one is grounded). If this causes the starter to turn the ... no power going to any of the leads on the ignition relay? if not... then probably an ignition switch... (end edit) check the ignition relay ... It's time to back-trace from the key switch on the column to the battery and see where there is a problem. The symptoms point to the ignition switch circuit. One of the most common problems in this circuit is a cracked ignition switch. It died, and when I hit the starter button, all the power shut off instantly. I figured it was a fuse, and I'd deal with it later in the day. John76 ... Make sure the Black/white wire is connected to the #50 tab on the starter... not the #15 tab. You can connect the Red/black wire to the ... There is power to starter in the run position, but the second you turn the key to start it loses all power to the starter. No idea where to go from here, ...