Bleeding Your Smart Car's Coolant System A Step-by-Step Tutorial

Bleeding by lifting temperature sensor at top of thermostat housing is the only and proper way. Works each time - totally foolproof. Tying a ... The correct method for bleading air out: since there is no bleeder valve, leave the cap off until car gets to temp. Also squeeze the hoses to burp the air out with cap off the catch tank . I do mine a little at a time run engine up to temp,, then turn it off ... Also, the pumps won't run dry, and must be primed with liquid before they will operate. Make sure to mount them at a low spot in your coolant system to avoid ... ... System. Medical Products. Alcohol Based Hand Sanitizer · Surgical Gloves as per ... Smart Meters (V2) as per IS 16444 (Part 2), AC Static Transformer ... Bleeding a coolant system - I put in a new thermostat and a temperature sensor on my 2006 Pontiac GXP with a 5.3 L engine but it continues ... Cap off and jack up the front of the car about 2-3 ft and the air pocket will just rise to the top...or you can use a pressure tester and pump ... Some cars have a bleeder valve located on the thermostat housing or near the water pump. If your car has one, open it slightly to release any trapped air. You ... Just get another car, run it and parallel the batteries. That's how I bled my cooling system. This. At Halfords we've got car parts and auto spares for every car. We stock over 130000 thousand OEM car parts and we're never beaten on price.