Unlock Steering Precision Replace Tie Rod Boots for Optimal Handling

You can certainly replace the boot (I did this myself on a Subaru), and if the rack seal leak is tiny it might last you a year or two. But it ... Clamps can be popped off easily without the right tool and then just use zip ties. I know the last rods I replaced, the boots were all ... Mechanical Problems/Vehicle Issues and Fix-it Forum - Replace inner tie rod end boot? - Hello CivicForums, Well, my never-ending list of ... You don't have to take the tie rod end out of the knuckle you can just unthread the tie rod from the tie rod end and since the rack end is a ... You cannot replace just the boot, you have to replace the drag link end. This is probably a wear and tear type item and it is probably not covered under ... Autozone "HELP!" section has some generic boots that may work. Or you could get the tie rod exchanged as Moog has a lifetime warranty on them. Shop for New Auto Parts at 1AAuto.com https://trq.video/c-306-h Rubber or plastic boots cover a variety of joints to protect them from dirt, ... You can replace just the boot, but it's the same job to just replace the whole axle and a lot less headache. Look for the write up on Audiworld on how to do it. The replacement 'kit' is a boot, a puck (so you can slip it over an existing tie rod and just repair the boot) and a couple of clamps. Just replace both inner and outer including the boots while you're down there. The inners will give you a little more problem to take out than the outers.