Transform Your Vehicle's Handling Replace Tie Rod Boot with Excellence

tools required. that tube on the right side is my vacuum cleaner extension which we will be using to install the new boot onto the tie rod. outer or inner tie rod?? You can replace the one side you ripped. Even with new boots the extra grease has to go somewhere. I'd just be careful and clean up after you grease the joint next time. I bought a ... You don't have to take the tie rod end out of the knuckle you can just unthread the tie rod from the tie rod end and since the rack end is a ... Many times your car's tie rod ends can be saved when it is only the rubber boot that is busted or dry rotted. Here is a video how to install ... You definitely don't want to leave the tie rod with the broken boot. It will get contamination in there and fail much faster. At this point, you ... If you replace the tie rod ends the new ones will most likely come with Zerk fittings - don't over-grease them and blow the new boots. Yes you can buy just the boots. I would replace it with a tie rod from a V8 ZJ. I spent $20 on mine from a junk yard and have beat it pretty ... Before you replace anything unnecessarily you should really consider properly diagnosing the real problem. Just replacing parts can get very ... To replace the inner tie-rod boot, you will need to release outer tie-rod end from knuckle, and remove the outer tie-rod end (release locknut and turn off).