Elevate Your Driving Experience Replace Tie Rod Boot for Ultimate Control

Well... finally got the sucker figured out. The driver's side was a HUGE PITA... I ended up pulling the boot over a bottle in the garage, ... Just replace both inner and outer including the boots while you're down there. The inners will give you a little more problem to take out than the outers. This wall take the entire boot of with it. You can try to use a socket and place it over the bottom of the tie rod so that it just catches the ... Buy Now! New Steering Rack & Pinion Bellow from 1AAuto.com https://trq.video/ia-1ASFK08345 New Steering Rack & Pinion Bellow from 1AAuto.com ... You just put the tie rod end in a Vice with the threaded portion facing down.. Get a cold steel Chisel and place it right on the lip..(the lip is actually the ... I just replaced one of those boots the other day. I would just replace both inner tie rods while your at it since you have to remove them (or ... Now I have a inner cv boot that is completely destroyed. I got the shaft back in. Do you guys think I can just replace the boot or am I going to ... Yes, you can change them without removing the steering rack. Jack it up, remove front tire, remove the outer tie rod attachment bolts from the steering knuckle. If there's no play in the joint itself I wouldn't worry about it right now. It's just a dust boot. Really some inner rods are a pain and then ... Yeah,nail polish works good IF you clean the grease/oil off of both sections and wait for it to dry.You hold the inner from turning w/a wrench..