Automotive Autonomy Replace Tie Rod Boots with Confidence

If you need to replace just the boot, because it cracked due to age, and the tie rod joint itself, is still good, I'd look into an Energy ... It is okay, but you are getting dirt in the joint but should not cause a problem for some time, probably would not want to run it past next winter. It's easy, you just need a press to pop the outer tie rod out of the knuckle. Replacing it completely should only take 15 minutes or so. You can ... The procedure is all most the same for all the cars. The only not common tool You will need is the Ball Joint separator. When You replace ... You can replace just the boot, but it's the same job to just replace the whole axle and a lot less headache. Look for the write up on Audiworld on how to do it. Good practice is to take a knife and cut down the defective boot. Afterwards you will see, that the tie rod is screwed into the rack. To install ... Just replace both inner and outer including the boots while you're down there. The inners will give you a little more problem to take out than the outers. You can change just the boot but you will have to unscrew the ITR from the OTR. May mean you need to have it aligned afterwards but if you ... An experienced tech can easily tell any noticeable wear, but yes, up on the hoist is necessary. Is this a shop you trust? You may be able to ... Watched several videos on YT of folks changing torn tie rod boots. They all had the tie rod on a bench. Looks to me like you could change the ...