TPS Reset Magic Restore Your Engine's Responsiveness

The final step before you can ride your new TSP Tuned map is to make sure you reset the powervalve and set the TPS to 0.40v. How do I reset the FI/ECU/TPS interplay so I get back to the baseline? I had thought that simply pulling battery would do it: that changes the ... Start the Engine and Let It Idle · Run the Engine for 3 Minutes, Shut It Off, and Run It for 3 Minutes Again · Turn the Key On, Let the Engine ... turn key on, wait for dinging to stop, a few seconds, push throttle pedal slowly to the floor, then let off quickly, turn key off. Repeat this ... Turn the key to the on position but DON'T start the engine. Now press the gas peddle to the floor SLOWLY and let it come up/back as fast as you can, turn key ... Open the scanner and log TPS volts with closed throttle. If TPS volts are above certain value the TPS will not reset to zero no matter what you try. General Tech - [Tutorial]How to reset throttle position sensor - Hi Guys, I had throttle problem , car was shaking and turning off so I ... Turn ignition switch “OFF” and wait at least 10 seconds. 5. Conform that accelerator pedal is fully released, turn ignition switch “ON” and wait 3 seconds. 6. Turn on the IGNITION SWITCH, wait for the CEL (Yellow engine light) to turn OFF.... ... Turn off IGN only... wait for 10 seconds and repeat this ... This is the easiest and fastest way to set and test your throttle position sensor. Why do you need to calibrate your TPS?