TPS Reset for Dummies Step-by-Step Instructions for Improved Engine Performance

Turn the key to the "On" position and wait for 20 seconds. You should here some relays and your fuel pump for a second. 3. Start your car ... Turn the key to the on position but DON'T start the engine. Now press the gas peddle to the floor SLOWLY and let it come up/back as fast as you can, turn key ... Open the scanner and log TPS volts with closed throttle. If TPS volts are above certain value the TPS will not reset to zero no matter what you try. TPS reset and a well tuned ECU could be the answer to your bike running lean/rich. Hold the kill button down. hold it starter button for 3 seconds. or so and then with no gas. and hold it wide open like this. 3 seconds all set. The Throttle Position Sensor, or TPS for short, measures how much the gas pedal is pressed and sends that info to the engine's computer. This ... :confused: MOGolf said: Key on with engine off. Push go pedal to the floor for at least 5 seconds. Release pedal. Turn key off. ... Do I get any kind of light or ... 1) Turn key to 'start' and wait till the chimes stop (do not start vehicle). · 2) Press gas peddle the whole way to the floor · 3) Then let your ... Reset the Throttle body Position and acceleration idle · Turn on ignition but don't start the car. (KOEO) · Depress gas pedal to the floor for at ... Push this button while holding down the RESET switch on the Controller. Hold down RESET until “NVRAM CLEAR” appears in green letters on-screen ...